Bently Nevada 330103-00-06-10-11-00 – 8mm Proximity Transducer System | 3300 XL Series Platform
The Bently Nevada 330103-00-06-10-11-00 is a precision eddy-current proximity transducer engineered for continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion in rotating machinery. As a core component of the 3300 XL Series platform, it delivers the measurement accuracy and long-term reliability demanded by petrochemical, power generation, and heavy industrial applications where unplanned downtime is not an option.
Procurement engineers sourcing this part number will find it fully interchangeable within existing 3300 XL installations, requiring no recalibration of the monitoring system when replacing a like-for-like unit.
Complete Technical Specifications
- Part Number: 330103-00-06-10-11-00
- Series / Platform: Bently Nevada 3300 XL Proximity Transducer System
- Probe Tip Diameter: 8 mm
- Cable Length (Probe): 0.6 m (integral armored cable)
- Extension Cable Length: 1.0 m
- Driver / Oscillator: 3300 XL 8mm Proximitor® Sensor
- Measurement Range: 0.25 mm – 2.26 mm (linear range)
- Scale Factor: 7.87 V/mm (200 mV/mil) ±1%
- Frequency Response: DC – 10,000 Hz (–3 dB)
- Supply Voltage: –24 VDC (–20 VDC to –26 VDC)
- Operating Temperature: –35 °C to +121 °C (probe); –35 °C to +66 °C (Proximitor)
- Target Material: AISI 4140 steel (standard); other ferrous/non-ferrous with derating
- Connector Type: MIL-C-5015 (probe); BNC (Proximitor output)
- Ingress Protection: IP67 (probe assembly)
- Agency Approvals: FM, CSA, ATEX, IECEx (intrinsically safe configurations)
- Weight: approx. 40 g (probe assembly)
- Country of Origin: United States
Proven Application Environments
- Rotating Machinery: Steam turbines, gas turbines, centrifugal compressors, pumps, fans
- Measurement Types: Radial shaft vibration (X–Y), axial position, differential expansion, eccentricity, speed (keyphasor)
- Industries: Oil & gas (upstream/downstream), LNG, petrochemical, power generation (thermal & nuclear), pulp & paper, mining
- Monitoring Systems: Compatible with Bently Nevada 3500 Series rack, System 1® software, and legacy 3300 monitoring hardware
- Hazardous Areas: Suitable for Zone 0/1/2 (ATEX) and Division 1/2 (FM/CSA) classified locations with appropriate barriers
Engineering Advantages
- Drop-in Replacement: Identical form, fit, and function to all 330103-00-06-10-11-00 units; no system reconfiguration required
- Thermally Stable Output: Temperature-compensated Proximitor circuitry maintains scale factor accuracy across the full operating range
- Armored Cable Construction: Stainless steel braid protects against mechanical damage, RFI, and chemical exposure in harsh plant environments
- Wide Frequency Bandwidth: DC–10 kHz response captures sub-synchronous, synchronous, and high-frequency vibration components
- Long Service Life: No moving parts; solid-state eddy-current technology eliminates wear mechanisms
- API 670 Compliant: Meets the requirements of API Standard 670 (Machinery Protection Systems) for critical machinery monitoring
System Architecture & Signal Flow
The 330103-00-06-10-11-00 operates as a three-component system:
- Probe (330103-00-06-10-11-00): Generates a high-frequency electromagnetic field at the tip. Eddy currents induced in the target shaft attenuate the field proportionally to gap distance.
- Extension Cable: Transmits the modulated RF signal from probe to Proximitor with minimal signal loss. Total system cable length is fixed at 5 m, 9 m, or custom — matched to the Proximitor calibration.
- Proximitor® Sensor (3300 XL 8mm, e.g. 330180-91-00): Demodulates the RF signal and outputs a DC-proportional voltage (–2 VDC to –18 VDC) to the monitoring rack or DCS input card.
Note: The Proximitor sensor is sold separately. Verify total cable length matches the Proximitor calibration certificate before installation.
Sourcing & Quality Verification
- All units sourced through authorized industrial distribution channels or directly from OEM-certified surplus inventory
- Each unit undergoes incoming inspection: visual, dimensional, and functional verification against Bently Nevada factory test specifications
- Traceability documentation (lot records, calibration certificates where available) provided upon request
- Units are stored in ESD-safe, climate-controlled conditions to preserve calibration integrity
- Counterfeit-risk mitigation: part markings, connector codes, and cable construction verified against OEM reference samples
Procurement Process
- Confirm compatibility: Verify your Proximitor model and total cable length match this probe assembly (330103-00-06-10-11-00 = 0.6 m probe + 1.0 m extension = 1.6 m total; Proximitor calibrated for 5 m system requires additional extension cable)
- Request a quote: Contact support@konmask.com or call +0086 19859288691 for volume pricing, lead time, and documentation package
- Place order: Purchase directly via this listing or via PO — net payment terms available for qualified industrial buyers
- Receive & verify: Inspect unit against provided documentation; contact us within 5 business days if any discrepancy is found
Technical FAQ
Q: Is this a complete proximity transducer system or probe only?
A: The 330103-00-06-10-11-00 part number designates the probe with integral cable and extension cable. The Proximitor sensor (oscillator/demodulator) is a separate line item. Contact us to source the matching Proximitor.
Q: What is the correct Proximitor for this probe?
A: The 3300 XL 8mm Proximitor (e.g., Bently Nevada 330180-91-00 or 330180-51-00) is the standard match. Confirm total cable length and target material before ordering.
Q: Can this probe measure non-ferrous targets?
A: Yes, with scale factor derating. Bently Nevada publishes target material correction factors for aluminum, titanium, and other non-ferrous alloys. Contact our engineering team for application-specific guidance.
Q: Is the unit new, refurbished, or surplus?
A: We supply new-in-box, factory-surplus (unused), and certified-refurbished units depending on availability. Condition is clearly stated at time of quotation. All units pass functional verification before shipment.
Q: Do you provide a warranty?
A: Yes — 12-month warranty against defects in materials and workmanship from date of shipment, covering replacement or full refund.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






