Bently Nevada 330104-07-14-10-02-00 – 8mm Proximity Transducer System | 3300 XL Series Platform
Engineering Background
The Bently Nevada 3300 XL Series represents the industry benchmark for eddy-current proximity measurement in rotating machinery protection. Engineered to API 670 standards, this system delivers sub-micron resolution displacement sensing across the full operating envelope of steam turbines, gas turbines, compressors, and pumps.
Product Positioning
The 330104-07-14-10-02-00 is a complete, field-ready proximity transducer system comprising an 8mm probe, extension cable, and Proximitor® sensor. It is the preferred choice for procurement engineers specifying vibration and axial position monitoring on critical rotating assets where continuous uptime is non-negotiable.
Complete Technical Specifications
- Part Number: 330104-07-14-10-02-00
- Series / Platform: Bently Nevada 3300 XL
- Probe Diameter: 8 mm
- Probe Length: 14 mm (active tip)
- Extension Cable Length: 10 ft (3.05 m)
- Proximitor® Cable Length: 2 m
- Measurement Range: 0.25 mm – 2.26 mm (linear range)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC – 10,000 Hz (–3 dB)
- Supply Voltage: –24 VDC (nominal)
- Output Voltage: –1 VDC to –21 VDC
- Temperature Range (Probe): –35°C to +177°C
- Temperature Range (Proximitor): –35°C to +85°C
- Target Material: AISI 4140 steel (standard); consult factory for non-standard alloys
- Connector Type: Integral coaxial, reverse-polarity protected
- Ingress Protection: IP67 (probe assembly)
- Compliance: API 670, CE, RoHS
- Weight: ~80 g (probe + cable assembly)
- Country of Origin: USA
Proven Application Environments
- Steam turbine radial vibration and thrust position monitoring
- Gas turbine shaft displacement measurement (upstream / downstream bearings)
- Centrifugal compressor rotor dynamic analysis
- Boiler feed pump axial position protection
- Gearbox and motor shaft eccentricity measurement
- Integration with Bently Nevada 3500 / 3300 rack-based monitoring systems
Engineering Advantages
- API 670 Compliant: Meets the most stringent machinery protection standard for critical service equipment.
- High-Temperature Probe: Rated to +177°C, suitable for hot-section turbine bearing housings without derating.
- Broadband Frequency Response: DC–10 kHz captures both slow-roll runout and high-frequency sub-synchronous instabilities.
- Plug-and-Play Compatibility: Direct replacement for existing 3300 XL installations — no recalibration of the monitoring rack required.
- Integral Cable Assembly: Factory-terminated and tested; eliminates field-splice failure modes.
- EMI/RFI Shielded Cable: Maintains signal integrity in high-noise industrial environments (VFD, switchgear proximity).
System Architecture & Signal Flow
The 330104-07-14-10-02-00 operates on the eddy-current principle. The Proximitor® sensor drives a high-frequency oscillator signal (typically 1.0 MHz) through the coaxial cable to the probe tip. As the conductive target approaches the probe face, induced eddy currents load the oscillator, reducing its amplitude. The Proximitor® demodulates this amplitude change into a DC voltage output proportional to the gap distance, at a calibrated scale factor of 7.87 V/mm. This DC signal feeds directly into the Bently Nevada 3500 or 3300 monitor rack input card for alarm, trip, and trend processing.
Sourcing & Quality Verification
- Authenticity: All units sourced from authorized distribution channels or verified surplus with full traceability documentation.
- Inspection Protocol: Each unit undergoes incoming visual inspection, connector integrity check, and functional gap-voltage verification prior to dispatch.
- Documentation Available: Certificate of Conformance (CoC), calibration data sheet, and original manufacturer datasheet supplied on request.
- Warranty: 12-month operational warranty against manufacturing defects.
Procurement Process
- Add to cart and complete checkout — or contact us for a formal quotation (RFQ).
- Receive order confirmation with estimated lead time within 1 business day.
- Unit ships with CoC and packing list; tracking number provided via email.
- Technical support available pre- and post-sale via email or phone.
Technical FAQ
Q: Is this a complete system or probe only?
A: This is a complete proximity transducer system including the 8mm probe, 10 ft extension cable, and Proximitor® sensor — ready for installation.
Q: Is it compatible with the Bently Nevada 3500 monitoring rack?
A: Yes. The 3300 XL series is fully compatible with 3500 series monitor cards (e.g., 3500/40M, 3500/42M) without modification.
Q: What target material is assumed for the 7.87 V/mm scale factor?
A: The standard calibration target is AISI 4140 steel. For Inconel, titanium, or other alloys, a correction factor must be applied — contact our engineering team for guidance.
Q: Can I order a custom cable length?
A: The 330104-07-14-10-02-00 is a fixed-configuration part number. For alternate cable lengths, refer to the 330104 series ordering matrix or contact us for a custom configuration quote.
Q: What is the lead time?
A: In-stock units ship within 1–3 business days. Out-of-stock items typically have a 2–4 week lead time depending on sourcing.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






